Netw 360 Week 2 Ilab: Rf Behavior Calculations

NETW 360 Week 2 iLab: RF Behavior Calculations

Copy and Pate below link into your Browser to buy tutorial
http://hwpool.com/product/netw-360-week-2-ilab-rf-behavior-calculations/

NETW 360 Week 2 iLab: RF Behavior Calculations

Task 1: Power calculations
Use the calculator in the Power section to complete the following steps:
1. On the lower UNII-1 band (i.e., 5.150–5.250 GHz with 100 MHz channels), the maximum output power of the intentional radiator (IR) allowed by the FCC is 50 mW. The IR is also referred to as a wireless transmitter.

Click in the watts box and type 0.05 (50 mW = 0.05 watts). What is the dBm of 50 mW?

__________

2. On the middle UNII-1 band (i.e., 5.250–5.350 GHz with 100 MHz channels), the maximum output power of the intentional radiator (IR) allowed by the FCC is 250 mW.

Click in the watts box and type 0.25 (250 mW = 0.25 watts). What is the dBm of 250 mW?
__________

3. On the upper UNII-1 band (i.e., 5.725–5.825 GHz with 100 MHz channels), the maximum output power of the intentional radiator (IR) allowed by the FCC is 800 mW.

Click in the watts box and type the given power level in watts. What is the dBm of 800 mW?

__________

Scroll down to the Receive Sensitivity section. Review the information regarding receive sensitivity.
4. The receive sensitivity of a LinksysWUSB600N wireless network adaptor at 54 Mbps is -70 dBm. Click in the dBm box and type -70. What are the watts of -70 dBm?

__________

5. The receive sensitivity of a LinksysWUSB300N wireless network adaptor at 54 Mbps is -68 dBm. Click in the dBm box and type -68. What are the watts of -68 dBm?

__________
6. If you have to choose between these adaptors based on their receive sensitivity at the bit rate of 54 Mbps, which adaptor will potentially perform better in achieving the desired bit rate?

__________

Task 2: Cable loss calculations
Use the calculator in the Loss in a Coaxial Cable at 2.45 GHz section to complete...