The Relationship Between Speed and Angle of Disc Granulator

Disc granulator is a very important biological production of a device. Tilt rotating disk is the main working parts , the level and quality of its speed is good or bad particles have a very close relationship. Inclination disc granulator is one of the important factors affecting the disc granulator , this paper to elaborate on the relationship between speed and angle .Particles increases when the disk of the disk rolled , the more the number of materials per unit time in the scroll plate , the faster the grain growth , i.e., proportional to the speed of the granulator and the granulation of the efficiency relationships. But with the improvement of granulation disk speed , the centrifugal force increases, the particles close to the rim will prevent particles rolled down , the disk will appear funnel-shaped whirlpool. In order to maintain efficient use of the disk area , while improving the speed must increase the inclination of the disc . Due to the inclination of the disk increases, the final velocity of the particle will scroll accordingly increases, also increases to the disc edge and the impact on other particles , and therefore limit the inclination of the disk should be maintained in order to prevent the material scroll and granulation bring destruction.Scientific management, advanced processing technology and innovative manufacturing theory make Fote Heavy Machinery become the exporting base of flotation machine manufacturer, flotation line and famous grinding equipment in China. What Hongxing has done is for the clients and we believe that quality is the best way to develop market.The most suitable angle with the diameter of the disk on the disk . Due to the movement of the particles along with the end of the disk speed increases with the diameter of the disc , in order to avoid the red granular particles caused by the impact of other rupture disc inclination must be reduced , and the angle of the increase and decrease the diameter of the disc small .screw...